Artikelnr: 6921544060031

Description:

• With this jaw you can clamp parallel premachined workpieces with a lenght of min. 0 - max. 69 mm. /ATTENTION: on the TeleCentric 70M the Clamping range adapter is required to clamp to 0. The dowel pins serve as bearing surface and can be set at a height of 176mm and 191mm
• Minimum clamping edge loss: 20mm at height 176mm/5mm at height 191mm
• Material:hardened steel
• Case-hardened and tempered 720 + 50 HV10; hardening depth = 0,7 + 0,3
• Inclusive 4 dowel pins 4x10 DIN EN ISO 8734

Scope of Supply:

• 1x Zero jaw b70
• 4x Cylinder pins DIN 6325