• Snabba leveranser
  • Teknisk Support
  • Brett sortiment
Favoriter Logga In Support

Kennametal

Artikelnr: HSK..ER25..M

  • Good choice for milling, drilling och tapping.
  • Supplied with locknut and stop screw.
  • For internal coolant use sealed collet or adapt coolant locknut with ER coolant-sealing disk.
  • All ER collet chucks are RFID ready for standard ISO data carrier, and ER collect chucks
    are balanced to G2.5 at 20,000 RPM.
  • Collet must be loaded into locknut first before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
  • Locknut wrench must be ordered separately.
  • HSK coolant unit and wrench must be ordered separately.

HSK • ER25 • Hylschuck Ø1-16mm
  • Beskrivning
    • Good choice for milling, drilling och tapping.
    • Supplied with locknut and stop screw.
    • For internal coolant use sealed collet or adapt coolant locknut with ER coolant-sealing disk.
    • All ER collet chucks are RFID ready for standard ISO data carrier, and ER collect chucks
      are balanced to G2.5 at 20,000 RPM.
    • Collet must be loaded into locknut first before loading into the chuck body, insert the cutting tool, then tighten to the recommended tightening torque.
    • Locknut wrench must be ordered separately.
    • HSK coolant unit and wrench must be ordered separately.
  • Specifikation
    Hylsa, typ ER25
    Diameter, D2 42
    Diameter, D11 42
    Produkttyp Hylschuck ER
    Genomgående kylning/kylkanal Ja
    Material Stål
    Max varvtal, RPM 20000
    Gränssnitt, riktning arbetsstycke ER25