• Snabba leveranser
  • Teknisk Support
  • Brett sortiment
Favoriter Logga In Support
5230VS12 Insert • -423 • LIGHT TO GENERAL MACHINING
5230VS12 Insert • -423 • LIGHT TO GENERAL MACHINING
P
M
S

Kennametal

Artikelnr: SDHT120412EN423..

  • First choice for light to general machining in steel, stainless Steels and high temperature alloys.
  • Excelent for  roughing and semi-finishing of Nickel Based Alloys, Cobalt Alloys,
    Stainless Steels, Titanium Alloys and High Temperature Alloys.
  • A strong positive geometry first with a smaller primary angle and a
    small controlled hone to reduce cutting pressures, followed by a higher
    secondary angle to allow free cutting of the chip without rubbing on the
    insert rake face.
  • Chip flow compresses the chip for easy evacuation.

5230VS12 Insert • -423 • LIGHT TO GENERAL MACHINING
Logga in för pris
  • Beskrivning
    • First choice for light to general machining in steel, stainless Steels and high temperature alloys.
    • Excelent for  roughing and semi-finishing of Nickel Based Alloys, Cobalt Alloys,
      Stainless Steels, Titanium Alloys and High Temperature Alloys.
    • A strong positive geometry first with a smaller primary angle and a
      small controlled hone to reduce cutting pressures, followed by a higher
      secondary angle to allow free cutting of the chip without rubbing on the
      insert rake face.
    • Chip flow compresses the chip for easy evacuation.
  • Specifikation
    Idealisk medelspåntjocklek, hm 0.06
    Radie, Rε/R/RC 1.2
    Skärformat (Produktfamilj) SD..1204.. (5230VS)
    Storlek, D (IC) 12.7
    Längd, L10 12.7
    Tjocklek, S/T 4.75
    Rotationsriktning N - Neutral
    Geometri EN-423
    Direktpressat / precisionsslipat Precisionsslipat
    Enkelsidigt/dubbelsidigt Enkelsidigt med geometri
    Antal skäreggar 4 st
    Produktfamilj 5230VS12
     

Vi använder cookies för att ge dig den bästa upplevelsen av vår webbplats. Du godkänner användningen av cookies genom att trycka OK och surfa vidare på webbplatsen.